YP/YVP Series Variable-frequency Control Three Phase Asynchonous Motor

Performance Introduction

YP/YVP series frequency and pressure-varied three-phase asynchronous motor is the latesr unify design in our country, which derived from Y2 series.They not only looks beaufiful and dignified but also low noise,low vibration.They have widr scope regulate speed and it is so steady that has no class.They have independent and well ventilates cooling systerm,and they can run at low speed over a long time. The motors are matched with all transducer,have the fast dynamic responding with vector control,no torque wave at low speed,no resonance,for this series the frame numver is from 80 to 315,totally 12 frame numbers and 23 specifivations.At present, our factory produces motor at the frame number from 80to280, totally 11 frame numbers and 19 specifications, This series is made according to the JB/T7118-2004, (The technical conditions for YVP frequency-varied and multi-speed three phase asynchronous motor) . We can also produce YVPEJ series frequency-varied speed-varied electromagnmetism brake three phase asynchronous .

Application Condition

1、 Elevation should not surpass 1000 m.

2、 The ambient temperature should not surpass 4000 and not lower than -15℃.

3、 Average maximum relative humidity should not be over 90% for every month. The average temperature in a month shoud not be over 25℃.

4、Work system is S1 (continuing work system).

5、 Insulation degree is Fgrade.

6、 Rating voltage is 380V.

7、Rating frequency is 50Hz.

8、Cooling mode is IC416(cooling by independent fan)

Frequency-varied regulator-speed motor under the rated frequency,locked rotor torque max.torque,min.torque qtatarting while idle,their specific value to the full load torqur ≥ the value next list:

Technical Parameters

Frequency-varied motor frame,ratedoutput power,full load torque and frequency-varied limist as follows list:

Technical Parameters

Frequency-varied motor matched,frequency-varied device and bearing fan caoacity:

Technical Parameters

Vibration and nose while unloaded and power supplied by frequency-varied machine should ≤ next list:

Technical Parameters